A blog for those interested in identifying vintage Hinton Hunt 20 mm wargames figures.
Where possible identification photos will be of unpainted figures.
Hi, REf swords I make them from staples. You can buy various sizes and thicknesses and they are straight. Flatten out the staple with hammer. Cut to length Sharpen end Smooth other end drill hole in hand Glue staple in hand with just the tiniest bit of the smoothed end showing through. et Voila Curved sword sharpen along one edge only and bend a little.
Thanks Roy, I'll try that (although 192 sabres have just arrived from Musket Miniatures). I can see staples working well as they are flat not round to start with and maybe the metal flattens more easily than modern pins? Will especially keep it in mind for heavy cavalry swords
I welcome comments on this blog and on the posts in it. All comments are moderated (so I have to approve them before they appear here). I receive notification of comments once you have made them.
If you want to contact me to send photos etc you can e-mail me HERE
King Darius on his portable throne
Searching
For the Napoleonic range there are now four main ways to search this blog for the figure you are looking for.
If you can read the first part of the code number of a figure, you can search using codes.
If you know or think you know the nationality of the figure, you can search by nation.
If you are looking for a foot figure (infantry or artillery), you can search by pose.
If you are looking for a mounted figure, you can search by type.
For smaller ranges (American Civil War and Medieval) there is a simpler search - by range (ACW or Medieval) and then by foot, mounted or artillery figures.
There have been a number of people who have been an inspiration in pursuing this hobby and getting this project off the ground.
I couldn't have got started properly myself without the Vintage 20 mil site created by Richard and Harry .
Pierre Omidyar invented e-bay in 1995 and so has been responsible for my haemorrhaging money for the last few years.
I would like to thank fellow e-bay buyers who have made prices for Hinton Hunt items so high on e-bay that I have mainly stopped haemorrhaging money and am very tempted to start selling instead of buying.
A group of fellow collectors and enthusiasts have offered help, support, comments, figures, words of wisdom, or even sold me figures - among them Alan, Dick, Harry, Ian, Iain, Jim, John, Peter, Tony, Uwe and Will. If I have missed you off you know who you are (and I have obviously forgotten).
Thanks to those who have joined in the joint purchase of a number of large collections and who have passed on the opportunities for these.
And not really for this blog, thanks to those who are buying up the moulds for a number of lovely old 20mm ranges (other than Hinton Hunt) and will be bringing them into production soon.
2 comments:
Hi,
REf swords I make them from staples. You can buy various sizes and thicknesses and they are straight.
Flatten out the staple with hammer.
Cut to length
Sharpen end
Smooth other end
drill hole in hand
Glue staple in hand with just the tiniest bit of the smoothed end showing through.
et Voila
Curved sword sharpen along one edge only and bend a little.
Roy
Thanks Roy, I'll try that (although 192 sabres have just arrived from Musket Miniatures). I can see staples working well as they are flat not round to start with and maybe the metal flattens more easily than modern pins? Will especially keep it in mind for heavy cavalry swords
Clive
Post a Comment